Fittings and Aquatrays

  • Aquatray 1m

    Aquatrays are robust, injection molded channels designed to accommodate rockwool slabs of both 1m and 1.3m in length. Available in two lengths; 1m (incorporating two drainage holes and two corresponding 90 degree fittings) and 1.3m (incorporating one central drainage hole and a ridged base for optimal drainage). These trays can be invaluable to the DIY growers looking to fit a passive hydroponic s...


    From
    £0.00
    DETAILS

  • Barbed Tee Piece

    Barbed Tee peice for for low pressure and outdoor irrigation systems. Available in 12mm and 16mm sizes....


    From
    £0.45
    DETAILS

  • 90 Degree Barbed Elbow

    90 Degree barbed elbow for low pressure and outdoor irrigation systems. Available in 12mm and 16mm sizes....


    From
    £0.45
    DETAILS

  • Straight Connector

    For connecting two pieces of the same size pipe together. Available in 12mm and 16mm diameters....


    From
    £0.35
    DETAILS

  • End Stops

    Can be added at the end of pipe runs to stop any leaks....


    From
    £0.50
    DETAILS

  • 16mm>4mm reducer

    Reduces down from 16mm to 2 x 4mm - this very useful fitting is pefect for drip systems and autopots....


    From
    £1.30
    DETAILS

  • 4mm Tee Piece

    Great for making drip rings from 4mm dripper line....


    From
    £0.35
    DETAILS

  • Barbed Cross

    16mm barbed cross for extending irrigation tubing....


    From
    £2.05
    DETAILS

  • Inline Tap 16mm

    Very high quality in-line tap for adjusting flow rates and isolating individual dripper lines....


    From
    £2.90
    DETAILS

  • 8 Way Manifold

    Takes 16mm pipe into 8 x 4mm outlets....


    From
    £3.65
    DETAILS

  • Drippers

    Drippers availalable in three different versions:- The Flood Dripper is an unrestricted dripper for use in system where the flow of water has been through some kind of pressure regulator, or in smaller systems where equal pressure is likely anyway. The Arrow Dripper is a 2 litre per hour regulated dripper for use with Wilma systems The Octa-Mitter is an adjustable flow dripper....


    From
    £0.25
    DETAILS

  • Non Return Valves

    Used in-line, this product does not allow water to flow back towards the pump after it has stopped pumping....


    From
    £5.20
    DETAILS

  • Tub Outlets

    Allows you to cut a hole through any surface and join pipework to the other side. Comes with rubber grommet to prevent leaks....


    From
    £5.20
    DETAILS

  • Blue 6mm Barbed Double Inlet

    Blue 6mm Barbed Double Inlet to help spread the nutrient solution evenly at the head of an NFT tray....


    From
    £0.90
    DETAILS

  • Inline Filter

    Barbed 16mm inline filter for use in low pressure irrigation systems. The filter should be placed at the beginning of the irrigation lines, straight after the tank, to prevent large particles travelling through the lines and blocking drippers or dripper line. The filter screen itself is removable for cleaning....


    From
    £6.05
    DETAILS


© 2003 - 2016, Greens Hydroponics, All Rights Reserved.